B & G e1610 series horizontal end suction pump
E1610 water pump is a single-stage single suction centrifugal pump with axial water inlet and radial water outlet. The bottom of the pump shell is fixed with the steel welded base.
Grease lubricated guide deep groove ball bearing.
The water pump and motor are connected by elastic coupling.
The standard seal is a long-life, wear-resistant mechanical seal.
Product description 1
E1610 water pump is a single-stage single suction centrifugal pump with axial water inlet and radial water outlet. The bottom of the pump shell is fixed with the steel welded base.
Grease lubricated guide deep groove ball bearing.
The water pump and motor are connected by elastic coupling.
The standard seal is a long-life, wear-resistant mechanical seal.
Product Description 2
1. Perfect type spectrum - 52 models, with supporting power up to 160kW, flow up to 2100m3 / h and lift up to 160m.
2. Optional working pressure (16bar / 25bar) - the pressure level of inlet and outlet flanges is the same. The flanges can be produced according to GB, ISO, DIN, ANSI and JIS standards according to customer requirements, reflecting the efforts made by xylem company to meet the needs of different users. The water pump adopts high-quality materials and the pressure can reach 25bar.
3. A variety of pump materials (HT250, SS304, SS316, bronze, etc.) can be selected to meet the use requirements of customers in different environments.
4. It can be equipped with a variety of speed motors (2-pole, 4-pole and 6-pole) to meet customers' requirements for noise in different environments.
5. Heavy duty stainless steel shaft, short shaft design, good rigidity during high-speed operation, compact structure and small floor space.
6. The closed impeller structure has high efficiency and good cavitation resistance. The balance hole is used to balance the axial force, with good dynamic balance and low vibration, which is conducive to prolonging the service life of the equipment; All impellers are subject to secondary cutting to meet the actual needs of customers.
7. The rigid heavy-duty full welded base does not need grouting to ensure the smooth operation of the water pump and avoid the damage of the mechanical seal and bearing due to the deformation of the base.
8. The pump casing with integrated support feet extends the service life of mechanical seal and water pump.
9. Mature rear pull design - the pump casing is an efficient eccentric spiral structure and adopts the rear pull design. There is no need to disassemble the pump casing and pipeline system and re align during maintenance, which greatly reduces the maintenance workload. 
10. The degree of standardization is very high. All models adopt a total of 4 specifications of pump shaft and suspension body, as well as supporting bearings, mechanical seals and couplings, which greatly improves the interchangeability of parts and ensures the processing quality and supply cycle of parts. More importantly, it can greatly reduce the number of users' spare parts, facilitate maintenance management, and directly bring benefits to users!
11. NSK maintenance free bearing is adopted.
12. The single face high-quality mechanical seal (John Crane) conforming to ISO3069 standard has good sealing performance and normal service life of more than 10000 hours, ensuring no water leakage under high water pressure and stable and reliable operation.
13. The omni-directional protective cover meets the requirements of the American Safety Association (OSHA) to avoid personal accidents.